K-128 subscriber concentrator
General information
-
Interconnection with digital PBX via V5 interface over one or two E1 line links organized over symmetrical copper cable pairs in accordance with G.703, G.704, G.706 ITU-T.
-
Two options of subscriber port types: PSTN with standard two-wires telephone channels parameters and ISDN port, providing interconnection of the unit with ISDN modem via U-interface over two-wires channel.
-
Interconnection of the unit with subscriber modem via two-wires ISDN channels with basic access 2B+D.
-
Concentration of two-wires telephone channels (using PSTN ports) and/or 64 kb/s (B-channels) using ISDN ports.
-
Possibility of remote power supply of subscriber ISDN-modem with voltage from 95 to 110 V.
-
Protection of line and subscriber terminations against lightning and industrial over voltages.
-
Amount of PSTN ports assigned can be up to 128, ISDN ports – up to 20.
-
Maximum communications distance for ISDN ports is 5,0 km using TPP-0,4 cable and 6,9 rm using TPP-0,5 cable.
-
Maximum length of line links for E1 transmission is from 2 to 8 km, dependent of cable type.
-
Power supply from mains 220 VAC or from station battery 48/60 V
-
Support of network monitoring system.
-
Construction is 3U high cassette for installation into 19” “euro” cabinet.
[Open/Save exploitation manual]
K-128 unit
|
|