KBP-01 UPS set
General information
Providing guaranteed power supply for communications equipment with DC 48 V voltage in the cases of temporary absence of mains 220 VAC voltage.
For interruptions of mains power supply it provides power supply for the equipment for 24 hours with battery capacity of 40 A/h and load current of up to 0,7 A.
For low loads and for short mains 220 VAC interruption periods option with 7,2 A/h batteries is available.
Range of input AC voltage is from 150 to 265 V.
Maximum load current is 1,2 A.
Possibility of installation of additional module for conversion of input 48 VDC into output 250 VDC for power supply for remote equipment with load current up to 160 mA.
Protection from short circuits and critical discharge voltage of batteries.
Support of network monitoring system.
Installation into 19” “euro” cabinet, into AB-02 cabinet (with CSB GP12400 batteries) or direct fixing to the wall (in this case CSB GP1272 batteries are installed into AB-01 cabinet).
Composition of the set
| |
AB-02 cabinet |
Floor-mounted cabinet for installation of CSB GP12400 batteries and BP-01 unit (790 * 570 * 300 mm). |
AB-01 cabinet |
Universal cabinet for installation of CSB GP1272 batteries (440 * 265 * 129 mm). |
BP-01 |
Uninterrupted power supply
|
CSB GP12400 batteries |
12 V; 40 A/h (4 pcs)
|
CSB GP1272 batteries |
12 V; 7,2 A/h (4 pcs)
|
|
[Open/Save exploitation manual]
[Open/Save operator’s manual]
BP-01 unit |
AB-01 cabinet with batteries |
Installation into AB-02 cabinet |
|
|
|
|