TDM over IP equipment

Composition

PK-01 unit (board)

  • The unit is designed for transmission of four E1 streams over packet commutation networks (Ethernet, IP, MPLS) and also for Ethernet local networks traffic commutation.

  • The unit is a gateway between TDM and packet networks and it has built-in Ethernet switch for providing multi service communications (voice, video, data).

  • A pair of units constitute transparent channel for TDM traffic between equipment pieces with E1 interface. Any equipment with E1 interfaces according to G.703/G.704/G.823 can be connected to E1 ports.

  • The unit has 4 E1 ports, 8 Ethernet 10/100Base-ÒÕ ports and two main Gigabit Ethernet ports organized by SFP modules (fiber optical and/or copper).

  • Power supply of the unit can be made from DC voltage source with minus (36… 72 V) or from mains 220 VAC with the help of built-in power supply.

  • The construction of the device is 1U high unit for installation into 19” rack or a board for installation into M60 cassette.

[Open/Save exploitation manual]

[Open/Save operator’s manual]

PK-03 unit (board)

  • The unit is designed for transmission of four E1 streams over packet commutation networks (Ethernet, IP, MPLS).

  • A pair of units constitute transparent channel for TDM traffic between equipment pieces with E1 interface. Any equipment with E1 interfaces according to G.703/G.704/G.823 can be connected to E1 ports.

  • The unit has 4 E1 ports and one Ethernet 10/100Base-ÒÕ port.

  • Power supply of the unit can be made from DC voltage source with minus (36… 72 V) or from mains 220 VAC via BPP-6-35030 adapter.

  • The construction of the device is top-desk unit or a board for installation into Ì30ÀÅ cassette.

[Open/Save exploitation manual]

ââåðõ